Many computer users don’t realize how important is to Secure your Home Network , the internet router links most of their other devices together and to the world, so it has a highly privileged position that hackers can exploit.
Unfortunately many consumer and small-business routers come with insecure default configurations, have undocumented backdoor accounts, expose legacy services and have firmware that is riddled with basic flaws. Some of these problems can’t be fixed by users, but there are many actions that can be taken to at least protect these devices from large-scale, automated attacks.
Don’t let your router be a low-hanging fruit for hackers.
- Avoid using routers supplied by ISPs. These routers are typically less secure than those sold by manufacturers to consumers. They often have hard-coded remote support credentials that users can’t change and patches for their customized firmware versions lag behind patches for the same flaws released by router manufacturers.
- Change the default admin password.
- The router’s web-based management interface should not be reachable from the internet. For most users, managing the router from outside the LAN (local area network) is not necessary. If remote management is needed, consider using a VPN (virtual private network) solution to establish a secure channel to the local network first and then access the router’s interface.
- Even inside the LAN, it’s good to restrict which IP (Internet Protocol) addresses can manage the router. If this option is available, it’s best to allow access from a single IP address that is not part of the pool of IP addresses assigned to computers via DHCP (Dynamic Host Configuration Protocol). For example, configure the router’s DHCP server to assign IP addresses from 192.168.0.1 to 192.168.0.50 and then configure the web interface to only allow access from 192.168.0.53. The computer should be manually configured to use this address only when you need to connect to the router.
- Turn on HTTPS access to the router interface, if available, and always log out when done. Use the browser in incognito or private mode when working with the router so that no session cookies are left behind and never allow the browser to save the router’s username and password.
- Change the router’s LAN IP address if possible. Most of the time, routers will be assigned the first address in a predefined netblock, for example 192.168.0.1. If offered the option, change this to 192.168.0.99 or something else that’s easy to remember and is not part of the DHCP pool. The entire netblock used by the router can also be changed to one of those reserved for private networks. Doing this will protect against cross-site request forgery (CSRF) attacks that try to access routers through users’ browsers by using the default IP addresses commonly assigned to such devices.
- Choose a complex Wi-Fi password and a strong security protocol.WPA2 (Wi-Fi Protected Access II) should be the option of choice, as the older WPA and WEP are susceptible to brute-force attacks. If the router offers the option, create a guest wireless network, also protected with WPA2 and a strong password. Let visitors or friends use this isolated guest network instead of your main one. They might not have malicious intentions, but their devices might be compromised or infected with malware.
- Disable WPS (Wi-Fi Protected Setup). This is a rarely used feature designed to help users set up Wi-Fi networks easily by using a PIN printed on a sticker. However, a serious vulnerability was found in many vendor implementations of WPS a few years ago that allows hackers to break into networks. Because it’s hard to determine which specific router models and firmware versions are vulnerable, it’s best to simply turn off this feature on routers that allow it. Instead,
- The fewer services your router has exposed to the internet, the better. This is especially true if you haven’t enabled those services yourself and don’t know what they do. Services like Telnet, UPnP (Universal Plug and Play), SSH (Secure Shell), and HNAP (Home Network Administration Protocol) should not be reachable from the internet as they can pose serious security risks. They should also be turned off on the local network if they’re not needed. Online services like Shields UP by Gibson Research Corporation (GRC), can scan your router’s public IP address for open ports. Shields Up can also scan for UPnP separately.
- Keep your router’s firmware up to date. Some routers allow checking for firmware updates directly from the interface while others even have an automatic update feature. Sometimes these checks might be broken due to changes to the manufacturer’s servers over the years. It’s a good idea to regularly check the manufacturer’s support website manually for firmware updates for your router model. if you have any question about how you can Secure your Home Network please contact A+ Computers LLC and our IT Security team will contact you shortly.